You can move around with your keyboard
plus
minus
left
right
Drop pin on the map to start a new report
space
Press space again to adjust the location
space
Start new report here Reposition report here
Back to all reports

New path needed

Reported via mobile in the Footpath / pavement problem category anonymously at 10:50, Fri 9 February 2024

Sent to Buckinghamshire Council 35 minutes later. FixMyStreet ref: 5552932.

I walk to work from Fairford Leys to Telford Close. The path on Brunel Road is on the opposite side to where I need to walk. So my options are to walk in the mud after the path ends, or have to cross a very busy road to get to work. Could you please consider extending the path along the right side of Brunel Road, or install a pedestrian crossing. I am not the only person who walks to work in this area, so I know it will be benefical to everyone. This has been an issue for many years.

RSS feed of updates to this problem Receive email when updates are left on this problem.

Updates

  • The report has been passed to the Highway Officer, who will carry out an inspection of the issue within 10 working days, emergency defects will be corrected or made safe at the time of the inspection, if reasonably practicable to do so. In this context, making safe may constitute displaying warning notices, coning‐off or fencing‐off to protect the public from the defect or other suitable action. If the inspection team cannot make safe the defect at the time of inspection, then they will instigate the relevant emergency call procedures to ensure appropriate resources are mobilised to make the defect safe.

    There may also be occasions when the issue reported will not be repaired as it has been classified as a minor defect and does not pose any risk to either the safety or the integrity of the highway, these are called minimum recording levels as specified in our Highways Safety Inspection Policy.

    Posted by Buckinghamshire Council at 11:26, Fri 9 February 2024

This report is now closed to updates from the public. You can make a new report in the same location.